Water Treatment Plant (Multi-Stage Filter)
Teams design a filter system and optimize clarity vs flow rate using sand/gravel/filters/charcoal.
45 minMess: 3/5Matter & InteractionsEarth & Human ActivityEngineering Design
Safety notes
No ingestion. Keep charcoal dust out of eyes. Wash hands.
Step-by-step instructions
- Prepare 'dirty water' by mixing distilled water with flour or pepper (optional materials) in a clear cup. Label this as your test water.
- Cut the bottom off a clear plastic bottle (or use the top as a funnel). Invert it so the neck points down.
- Design your filter layers. Common designs: gravel at top, sand in middle, activated charcoal, then coffee filter at bottom. Students should sketch their design first.
- Layer materials carefully. Start with coffee filter at the narrow end (bottle neck), then add charcoal, sand, and gravel. Use masking tape to secure if needed.
- Pour dirty water slowly through the filter. Collect filtered water in a clear cup below.
- Observe and measure: Compare clarity (visual inspection) and measure flow rate (time to collect 100mL). Record data.
- Redesign and test: Based on results, modify the filter design and test again. Compare clarity vs flow rate tradeoffs.
- Discuss: What worked best? Why? How does this relate to real water treatment plants?
Materials you need
- Clear Plastic Bottles (1–2L)Can be donated/collected.
- Coffee Filters
- Washed Play Sand
- Gravel (mixed size)
- Activated Charcoal (aquarium)
- Distilled WaterCore solvent/control variable.
- Clear Plastic Cups (9–12 oz)
- Craft/Stir Sticks
- Masking Tape
- Permanent Markers
Nice-to-have materials
- All-Purpose Flour
- Ground Pepper
Suggested amounts (per class)
- Clear Plastic Bottles (1–2L): 8 count (1 per team + extras)
- Coffee Filters: 20 count
- Washed Play Sand: 10 lb (shared bin)
- Gravel (mixed size): 8 lb (shared bin)
- Activated Charcoal (aquarium): 1 lb (shared bin)
- Distilled Water: 1 gal (plus 'dirty water' mix)
Big ideas
- Separation & Filtration
- Pollution & Remediation
- Systems & Models
- Variables & Fair Tests
Topic areas this project explores
- Matter and Its InteractionsStructure and properties of matter, chemical reactions, conservation of mass, and how substances interact at the molecular level.
- Earth and Human ActivityHuman impacts on Earth systems, natural resources, pollution, climate change, and solutions to environmental challenges.
- Engineering DesignDefining problems, designing solutions, testing prototypes, optimizing designs, and the iterative engineering process.