Making Waves: Springs and Ropes
Use coil springs and string to make transverse and longitudinal waves and see how amplitude and wavelength change.
35 minMess: 1/5Waves & Information
Safety notes
Don't let go of a stretched spring; it snaps back. Keep springs on the floor or a long table.
Step-by-step instructions
- With a partner, stretch a coil spring about 2 meters along the floor. Tie a small piece of string to one coil as a marker.
- Transverse wave: shake one end side to side once. Watch the marker. Which way does it move compared to the wave?
- Longitudinal wave: push one end forward sharply once. Watch the marker again.
- Amplitude: make side-to-side waves with small, then large, shakes. Which carries more energy? (Look at how far the marker moves.)
- Wavelength: shake slowly, then quickly. Use masking tape on the floor to mark the distance between peaks.
- Repeat the transverse tests with a long piece of string.
- Analyze: Draw each wave type and label amplitude and wavelength.
- Discuss: Which wave type is like sound? Which is like a wave on water?
Materials you need
- Plastic Coil Springs (Slinky-type)Longitudinal vs transverse waves.
- Cotton or Nylon StringCup phones, wave ropes.
- Masking Tape
Big ideas
- Waves & Signals
- Systems & Models
Topic areas this project explores
- Waves and Their Applications in Technologies for Information TransferWave properties like amplitude and wavelength, how light and sound interact with materials, and why digital signals carry information reliably.