Marble Ramp Energy Transfer
Roll marbles down a ruler ramp into a paper cup; test how release height and marble mass change how far the cup is pushed.
40 minMess: 1/5EnergyMotion & Forces
Safety notes
Keep marbles off the floor to prevent slips. Small parts: not for students who mouth objects.
Step-by-step instructions
- Build a ramp: prop one end of a grooved ruler on a stack of books. Tape the bottom end to the table so it doesn't slide.
- Cut a 'door' in the rim of a cup and set it upside down at the bottom of the ramp so a marble can roll inside.
- Mark the cup's starting position with masking tape. Mark release heights on the ruler (e.g. 5 cm, 10 cm, 15 cm).
- Test height: release the same marble from each height 3 times. Measure how far the cup moves each time. Record the average.
- Test mass: release a small and a large marble from the same height 3 times each. Measure and average.
- Graph distance vs height and distance vs marble size.
- Analyze: Which change made the bigger difference? Where did the marble's energy come from, and where did it go after the collision?
- Discuss: Why didn't the cup keep sliding forever? (Friction converts kinetic energy to thermal energy.)
Materials you need
- Glass Marbles (assorted sizes)Energy ramps; mix of small and large for mass comparisons.
- Rulers with Center Groove (12")Doubles as a marble ramp.
- Clear Plastic Cups (9–12 oz)
- Masking Tape
- Copy Paper (letter, 8.5×11)Handouts, element cards, models.
Big ideas
- Energy Transfer
- Variables & Fair Tests
- Measurement & Error
Topic areas this project explores
- EnergyKinetic and potential energy, thermal energy transfer, and how energy moves between objects and systems.
- Motion and Stability: Forces and InteractionsForces, motion, Newton's laws, and how objects interact through pushes, pulls, and collisions.